Skip to main content

Bayshore Mechanical

Gas Furnace Service in Botetourt County & the Roanoke Valley

Safety First If You Smell Gas

If you smell gas or rotten eggs, leave your home right away. Do not flip switches, light anything or use your phone inside. Once you are outside and at a safe distance, call your gas utility or 911. After the utility says it is safe, call us for furnace service.

Gas Furnace Repair Roanoke VA Homes Depend On

A gas furnace is a reliable way to beat a cold Blue Ridge winter. It also has parts that wear out with every heating season. Bayshore Mechanical is a family-run HVAC company based in Troutville, Botetourt County. We have kept local furnaces running safely for more than 30 years.

Our approach is simple. We listen to what you have noticed, find the real cause and explain it plainly. You get options and prices before any work begins.

What We Check and Repair

  • Ignition system: hot surface igniters and pilot assemblies that fail to light.
  • Flame sensor: a dirty sensor can shut the burners off seconds after they light.
  • Heat exchanger: we inspect for cracks or corrosion that could leak combustion gases.
  • Blower and motor: worn bearings, loose wheels and failed capacitors.
  • Venting and draft: flue pipes, inducer motors and pressure switches.
  • Controls: limit switches, control boards and gas valves.

When to Call for Furnace Repair

Call us if your furnace shows any of these signs:

  • It starts, runs briefly, then shuts off over and over.
  • The blower runs but the air stays cold.
  • You hear banging, squealing or loud rumbling at startup.
  • The burner flame looks yellow and lazy instead of steady blue.
  • Your carbon monoxide alarm sounds. Get everyone outside and call 911 first.
  • Some rooms stay chilly while others overheat.

The Filter Is Often the First Clue

A clogged filter chokes airflow across the heat exchanger. The furnace can overheat, trip its limit switch and shut down. Many no-heat calls start here. Checking the filter is a good first step before you call.

What to Expect From a Service Visit

Your technician will ask questions, then inspect the furnace from the burners to the vent. We test safety controls and measure temperature rise across the system. We also check for gas leaks at the furnace connections. When we finish, we show you what we found. If a repair is needed, you approve it first.

Why We Recommend Twice-a-Year Maintenance

Bayshore recommends bi-annual maintenance for gas furnace systems. A fall visit gets the furnace ready for heavy use. A spring visit checks the shared blower, wiring and drain before cooling season. Regular service helps the system run efficiently and catches safety issues early.

Our money-saving maintenance agreements make this easy. We keep track of the schedule, so you do not have to.

Simple Habits That Help

  • Change or check the filter every one to three months.
  • Keep storage boxes and paint cans away from the furnace.
  • Test carbon monoxide alarms monthly.
  • Keep the outdoor vent clear of snow, leaves and nests.

Home Warranty and Free Estimates

Do you have a home warranty plan? We handle home warranty repair work on covered furnaces. If you are weighing a new furnace instead, we offer free estimates. Either way, you get the same careful work and plain answers.

Services That Pair With Your Furnace

A furnace moves a lot of air, so what is in that air matters. Our indoor air quality products and services include better filtration and humidity control for dry winter air. Weak airflow to certain rooms often traces back to the ducts, which our duct modification and equipment install team can correct. You can also pair your furnace with a smart thermostat for easier scheduling.

Where We Provide Furnace Service

We serve gas furnace customers in Botetourt County, Roanoke, Salem, Hollins and Vinton. Many homes in the Roanoke Valley have furnaces tucked into basements, crawlspaces or closets. We are used to all of them.

Get Your Furnace Checked

Ready for a safer, warmer winter? Call (540) 798-9113 or contact us for a free furnace estimate. We will treat your home like our own.

Gas Furnace Repair Questions

Why does my gas furnace light and then shut off?

A common cause is a dirty flame sensor. The sensor confirms that the burners have lit. When it is coated with residue, the furnace cannot tell a flame is present, so it shuts the gas off for safety. Other causes include a clogged filter, a blocked vent or a failing pressure switch. A technician can test each part and find the true cause.

What is a cracked heat exchanger and why does it matter?

The heat exchanger separates the burner flames from the air that circulates through your home. Years of heating and cooling can cause cracks or holes. A damaged heat exchanger may let combustion gases, including carbon monoxide, mix with your indoor air. We inspect it during service visits. If we find damage, we show you what we see and explain your options.

Why should a gas furnace be serviced twice a year?

Bayshore recommends bi-annual maintenance because the furnace blower and controls work in both seasons. The fall visit focuses on burners, ignition, venting and safety controls before heavy use. The spring visit checks the blower, wiring and parts that also serve your air conditioning. Two visits a year help catch wear early and keep the system running safely.

What should I do if my carbon monoxide alarm goes off?

Get everyone, including pets, outside into fresh air right away. Call 911 or your fire department from outside the home. Do not go back in until responders say it is safe. After that, call us to inspect the furnace, venting and other fuel-burning appliances. Never ignore a carbon monoxide alarm or assume it is a false alarm.

How often should I change my furnace filter?

Most standard one-inch filters need changing every one to three months. Homes with pets, allergies or ongoing renovation projects may need more frequent changes. Thicker media filters can last longer. The easiest rule is to look at it monthly and replace it when it looks gray or dusty. A clean filter protects the furnace and helps it heat more efficiently.